How to Fix ERR_SSL_VERSION_INTERFERENCE Error in Google Chrome?

The SSL error, ERR_SSL_VERSION_INTERFERENCE in Chrome, can occur due to various reasons, but it can also be easily fixed. How? Let’s explore the solutions!

Why do you trust a website while sharing your critical data with it? The only logical answer to that question is if it uses an SSL certificate. And how do you know that? You check the padlock icon in the address bar and the HTTPS extension in the web address. Almost every website uses an SSL error, but users still encounter irritating errors while surfing, such as the ERR_SSL_VERSION_INTERFERENCE error.

Many of you might have seen this error, whereas many of you might haven’t. No matter who you are among these users, knowing what this error is and how to fix it is necessary. As data security remains the prime concern, it is crucial to address any SSL-related errors promptly.

Here in this extensive article, we will closely analyze all the reasons for the ERR_SSL_VERSION_INTERFERENCE chrome and how to fix it!

What is the ERR_SSL_VERSION_INTERFERENCE, and what are the reasons behind it?

Whenever an error occurs on your browser with the term SSL, it is obvious that it will be due to the SSL certificate. We use an SSL certificate to protect the online communication and data you share with the website. Hence, if this error occurs, you have to be serious about it.

Understand SSL Certificate Technically using this guide.

The Net err_ssl_version_interference can primarily occur due to two to three reasons, such as

• There can be an issue in determining the SSL version.
• An SSL version conflict on your device can cause this error.
• The Google Chrome browser may have some glitches that can pop this error.

As all of these reasons are related to the browser of the user, it can be fixed from the user’s side. Hence, the following section describes some of the best ways to Fix ERR_SSL_VERSION_INTERFERENCE.

How to fix ERR_SSL_VERSION_INTERFERENCE error in Chrome?

Ok, so if you are facing the ERR_SSL_VERSION_INTERFERENCE on your browser, you can undertake any of the following ways to fix it. Beware that none of these methods is a sure-shot way to fix ERR_SSL_VERSION_INTERFERENCE error. Any of them can work for you.

1. Clear the Browsing Data

Know this, no matter if you are facing this error or not, you should get rid of the browsing data on a timely basis. If we talk about the error, there may be some outdated data entries in the cache of your computer that might be the reason behind this error. Hence, you can delete the browsing data and check if it fixes the problem.

To delete the browsing data, follow these steps!

1. Press Ctrl+Shift+Del on the keyboard.
2. In the opened window, tap on the Time Range dropdown and choose All Time.
3. Check the cookies and cache data checkbox.
4. Click on Clear Data.

After all these steps, run the website and check if the error is fixed.

2. Flush the DNS Cache

Google uses DNS to look for the IP address behind each domain name, and the PC stores these in the form of a cache. If case of an error in the DNS cache, the ERR_SSL_VERSION_INTERFERENCE error can pop up. The clear way to solve this error is to flush the DNS.

Here are the steps to flush the DNS!

1. Press the Window icon button accompanied by R.
2. Type in cmd and hit Enter.
3. Type ipconfig /flushdns and press Enter.

Retry the website you want to run and check if the issue is fixed.

3. Update Chrome

This is not a likely fix, but it is not bad trying. Sometimes the old version of Chrome may not support the latest TLS version. Hence, it is best to update the Google Chrome application on your PC.

Update the Chrome browser and check if it fixes the ERR_SSL_VERSION_INTERFERENCE chrome error.

4. Check the Date and Time Settings

If you know, each SSL certificate has an expiry date. An SSL certificate has a validity of 2-5 years based on the plan opted for by the client. Hence, if you are trying to access a website from a PC with an incorrect date and time, it may consider the SSL certificate invalid. Therefore, adjusting the date and time of the system might fix ERR_SSL_VERSION_INTERFERENCE error.

Here are the steps to change the date and time on your PC.

1. On the bottom right corner, hover over the date and time section and right-click on it.
2. Choose Adjust date/time.
3. Choose the right time zone yourself, or let Windows do it for you.
4. Click on Sync Now, and you are done.

Check if the error is fixed or move to the next method.

5. Disabling any Browser Extensions

Google extensions can be a big problem besides being super useful for the user. Some of the extensions can be really troublesome while browsing the web. Therefore, it is ideal to disable them one by one and checking if disabling any of them leads to fixing the error.

If you get one, either disable it permanently or remove it from the browser.

6. Disable the Firewall and Antivirus

To ensure security, your Windows firewall or antivirus software might be blocking some IPs. Hence, you need to check the firewall settings to see which IP addresses are blocked by the firewall. If you find the one that corresponds to yours, remove it from the list and try opening the link again.

Make sure that if disabling the firewall fixes the issue, you don’t keep it permanently disabled as it may attract more problems for you. Check the antivirus settings also for the same. If there is any mismatch, change the settings and check if the error is fixed. Revert back the settings if the error is not fixed.

7. Reset Chrome

If any of the methods are not working, you can reset Google Chrome permanently. It will reset Chrome to the initial settings.

To reset Chrome, follow these steps!

1. Type in the address, chrome://settings/reset, in the address bar of the browser.
2. Look for the option, Restore settings to their original defaults. Click on it.
3. You will see the Reset Settings button in the pop-up window.
4. Click on it, and you are done.

Check if it fixes the error or move on to the next method.

8. Disable TLS 1.3

TLS 1.3 is the most secure protocol that needs to be enabled for safety. However, if the features of the installed SSL are not compatible with TLS 1.3, you can disable it while keeping the TLS 1.2 version enabled. This will help fix ERR_SSL_VERSION_INTERFERENCE error.

Follow these steps to disable TLS 1.3!

1. Open the Google Chrome browser and type in chrome://flags/#tls13-variant in the address bar.
2. Look for the TLS 1.3 option and open the dropdown next to it.
3. Choose the Disable option.
4. Restart the browser and try accessing the website.

If it works, make sure you work on updating the SSL certificate on your system so that it is compatible with TLS 1.3.

9. Disable QUIC Protocol

The QUIC protocol is equivalent to SSL/TLS. It assists in offering SSL equivalent connection to the Google servers. Though this fix is not recommended, it can be useful in some scenarios. Here are the steps for it!

1. Open the Google Chrome browser and type the command in the address bar of the browser, chrome://flags/#enable-quic.
2. The page will show you various options, including the Experimental QUIC protocol.
3. It will be marked default. You need to click on the dropdown and select disabled.
4. Relaunch the Google Chrome browser and verify if the error is gone.

Where to get the Best SSL Certificate?

Till now, the Err SSL version interference on your machine must be fixed. But, if you are the one who is worried that it may happen again. Go for buying a new SSL certificate. An SSL certificate can be brought from various vendors, but the one that can provide it to you at an affordable price is CheapSSLWeb.

You can get all types of SSL certificates, from single-domain and multi-domain to wildcard SSL.

Conclusion

SSL errors are pretty common, and so are their solutions. Hence, if you face the Net err_ssl_version_interference in your browser, one of the above-described solutions is surefire to fix it. Make sure that if you make any changes to the default settings of the machine, you revert them if it doesn’t fix the problem.

Search